dodal.devices.eiger.EigerDetector#

class dodal.devices.eiger.EigerDetector[source]#

Methods

`async_stage`()
`change_dev_shm`(enable_dev_shm)	param enable_dev_shm:
`change_roi_mode`(enable)	param enable:
`disable_roi_mode`()
`disarm_detector`()
`do_arming_chain`()	rtype: `Status`
`enable_roi_mode`()
`forward_bit_depth_to_filewriter`()
`is_armed`()
`set_cam_pvs`()	rtype: `AndStatus`
`set_detector_parameters`(detector_params)	param detector_params:
`set_detector_threshold`(energy[, tolerance])	Ensures the energy threshold on the detector is set to the specified energy (in eV), within the specified tolerance.
`set_mx_settings_pvs`()
`set_num_triggers_and_captures`()	Sets the number of triggers and the number of images for the Eiger to capture during the datacollection.
`set_odin_number_of_frame_chunks`()	rtype: `Status`
`set_odin_pvs`()	rtype: `Status`
`stage`()
`stop`(*args)	Emergency stop the device, mainly used to clean up after error.
`stop_odin_when_all_frames_collected`()
`unstage`()	rtype: `bool`
`wait_on_arming_if_started`()
`with_params`(params[, name])	param params:

Attributes

`ALL_FRAMES_TIMEOUT`
`ARMING_TIMEOUT`
`GENERAL_STATUS_TIMEOUT`
`STALE_PARAMS_TIMEOUT`
`arming_status`
`bit_depth`	A descriptor representing a device component (or signal)
`cam`	A descriptor representing a device component (or signal)
`component_names`
`detector_params`
`do_arm`	A descriptor representing a device component (or signal)
`odin`	A descriptor representing a device component (or signal)
`stale_params`	A descriptor representing a device component (or signal)
`subscriptions`
`filewriters_finished`

stop(*args)[source]#: Emergency stop the device, mainly used to clean up after error.

set_detector_threshold(energy: float, tolerance: float = 0.1) → Status[source]#

Ensures the energy threshold on the detector is set to the specified energy (in eV), within the specified tolerance. :type energy: float :param energy: The energy to set (in eV) :type energy: float :rtype: Status

Parameters:: tolerance (float, optional) – If the energy is already set to within this tolerance it is not set again. Defaults to 0.1eV.

set_num_triggers_and_captures() → Status[source]#

Sets the number of triggers and the number of images for the Eiger to capture during the datacollection. The number of images is the number of images per trigger.

Return type:: Status